At Cottrell, we believe communication is a key to our success. Whether you are seeking additional product information or just want to give us some feedback and suggestions, please feel free to contact us today!
NO! Cutting into these harnesses voids warranty on the wiring harness.
YES! Always get pictures of any issue you would like submitted for warranty. Pictures are to be sent to warranty@cottrelltrailers.com
The in-service date is the official date that your unit went into service. Please contact our warranty department if you believe you have a warranty issue that is within the warranty.
Call your warranty representative at 800-827-0132 Extension 313 or 301. Please have your VIN number of the trailer available and any pictures or additional information. Once we have determined that an issue qualifies for warranty, we will get you to a Cottrell Authorized Warranty Repair Facility or to Cottrell. We will then communicate with the facility to ensure any warranty work has been pre-authorized. Work performed at a shop that is NOT a Cottrell Authorized Warranty Repair Facility or that is performed without a preauthorized PO may not be covered.
You can take your unit to your choice of over 100 authorized warranty centers that can assist you or you can have them completed at our facility in Gainesville, GA. For a complete list of authorized warranty repair centers, click here.
Contact a warranty representative at 800-827-0132 Extension 313 or 301. We will begin the claim process and ensure that we follow correct procedures and minimize your downtime. You can also file a claim through the Cottrell website by clicking here.
Highmount trailers are the more conventional style of trailer that can be pulled with a typical tractor having a 5th wheel mounted on the tractor frame or chassis. A stinger set up is much lower to the ground and must have a headramp with a low mounted 5th wheel to make the connection.
The purpose of the sliding 5th wheel and sliding kingpin is to allow for a more generous turning radius when you get into a tight spot. They accomplish this in two different ways. On the sliding 5th wheel set up, the 5th wheel slides approximately 16”. ON the sliding kingpin set up, the kingpin does the sliding. The kingpin can be set in three different locations. All the way closed, in the middle, or all the way open.
Operators Manuals/Services Bulletins page